Most replacement rollers won’t fit vintage Martin saxophones; they’re usually too thick and too long. Since we restore Martin saxophones in the shop frequently, we fabricate these since the original, rusted rollers usually break during removal.
Looking for replacement screws for your new rollers? We sell them too!.
These rollers have the following specifications:
- Diameter is slightly reduced (7/32″) compared to most other rollers, to clear the keywork.
- Machined from a pearl-like white rod material.
- Available in the lengths Martin used throughout their production. Right pinky keys use the 11/16″ lengths, while left pinky keys use 1/2″ length.
- The center hole is drilled to fit the .086″ original screws. If you’re using a different diameter screw, let us know and we’ll drill accordingly.
- 1⁄2” × 7⁄32“
- 11⁄16” × 7⁄32“